Download Cac Card Reader Software For Mac

Software+download+mac'A=0 140 cac software for mac'A=0 140. ACR122U NFC Contactless Smart Card Reader Software Development Kit. Download the DoD Root CA 3 cert here: DoD Root CA 3. Click Allow to download configuration profile. Go to Settings General Profiles and Device Management and tap on DoD Root CA 3. Tap Install and enter your passcode if asked. Tap Install 2x to install certificate. Tap Done on top right.

When it comes to installing your new CAC reader onto your home computer, there’s a doubt that installing on Mac is much more complicated. Often, you’ll need to install a CAC Enabler just for your Mac to recognize the hardware. But don’t worry in this handy guide, we’ll walk you through how to install a CAC enabler for Mac and which one to choose.

Here’s the thing…. Mac has many different OS’s which means that there are many different CAC enablers. And some will work for particularly OS’s only.

MUST READ IMPORTANT INFO BEFORE YOU BEGIN

Before you get started downloading and installing your CAC Enabler, there is some information that you need to be aware of:

  • Only download and install ONE CAC Enabler. Multiple CAC Enablers can cause your CAC Card reader not to work. If you currently have an incorrect CAC enabler installed, you need to uninstall and remove it before getting the correct one. This includes built-in Smart Card Readers for the newer OS’s.
  • Some of these CAC Enablers will ask for a Keychain Password. You should already have this information. It’s your CAC PIN. But before you enter this information, make sure you’ve already selected your CAC Certificate. And you need to use your full CAC pin. Failure to do so can actually lead to you getting locked out of your CAC Card. If this happens, you’ll have to go to your nearest ID Card Office or PSD to get it unblocked.

CAC for a Mac is the ability to use a Department of Defense (DoD) common access card (CAC) on Apple Macintosh computers to access Web sites that require DoD certificate authentication. It was written to allow Navy Marine Corps Intranet (NMCI) users to access their NMCI e-mail using the NMCI Microsoft Outlook Web Access (OWA) portal. Windows 10 Smart Card Reader and Military Common Access Card. SOLUTION FOUND!!! There is an opensource software called “Smart Card Manager” which is referenced on militarycac.com as an alternative to using ActivClient 6.2 (AKA for those of us that can’t access a CAC secured site to download a program designed to enable the use of a CAC.

  • After successfully installing your CAC Enabler, you need to restart your computer before trying to access any CAC protected site. This ensures that your computer has properly recognized and installed the CAC Enabler.
  • Just because you’ve properly installed and set up your enabler, that doesn’t mean that it will work with all browsers–particularly Firefox. As popular of a browser it is, Firefox is notorious for not allowing CAC-protected sites to be accessed. This is why I recommend using Google Chrome. It has the least obstructions for you when it comes to using your CAC Reader.

What CAC Enabler Do You Need For Your OS?

In order to make sure that you download the right OS, be sure to use our handy Table of Contents to jump to the proper section.

And with that, let’s get your Mac system CAC Card ready!

Catalina (10.15.x)

If you’ve purchased a Mac with the Catalina OS installed, STOP RIGHT HERE.

Catalina comes pre-equipped with a built-in CAC Enabler. This means you do not need to install a third-party program. If you do, it may interfere with your built-in enabler and cause your CAC to not be recognized. Just be sure that you have the proper DOD certificates installed.

But what if you purchased your Mac and then upgraded to the new system?

If you haven’t installed any third-party enablers, the built-in function should automatically start working. But if you have previously installed any third-party CAC enablers, you’re going to have to uninstall and completely remove those first.

Mojave (10.14.x)

Similar to the Catalina OS, Mojave also has a built-in Smart Card Reader. This means that a third-party CAC enabler program may not be necessary. So before downloading any other enabler, test out the built-in first–just make sure you have the proper DOD certificates needed.

If your Mojave’s built-in reader is not working, then you can proceed to pick up another CAC enabler. There are 4 verified readers that work for Mojave that we know of.

Each of these should work for any type of CAC Card.

High Sierra (10.13.x)

High Sierra is another Mac OS with a built-in Smart Card reader. However, unlike Mojave or Catalina, you cannot access CAC-protected sites through Safari. They are not supported through Safari in this OS.

You need to use Google Chrome for optimal results. If you are adamantly opposed to using Chrome, I’d recommend to go ahead and update your Mac OS to Mojave or Catalina (if supported). Afterwards, you should find you don’t need a CAC enabler as long as you have the proper certificates.

However, if things aren’t working out the way they should, you do have some options for third party CAC enablers.

These have been verified to work with High Sierra and with every CAC Card type we’ve come across.

Sierra (10.12.x)

Sierra is the last of the Mac OS’s that has a built-in Smart Card Reader. However, you need to be aware that this reader will not function with the Safari browser even with the proper certificates.

You’ll need to utilize Google Chrome along with the proper DOD (or other) certificates.

There have been reports of the Sierra built-in CAC reader failing to operate properly. And in that case, you’re going to need to download one of these verified CAC enablers:

These CAC Enablers work with every type of CAC Card.

One thing to note is that if you decide to utilize PKard with Sierra, you need to make sure that you’re using PKard version 1.7 or higher.

El Capitan (10.11.x)

Unlike its newer OS counterparts, El Capitan does not come with a built-in smart card reader. You will be required to download and install a third-party program. Thankfully, there are 5 different CAC Enablers you can use.

One thing to note is that Smart Card Services will not work with all types of CAC Cards. If your CAC Card is designated as Oberthur ID One 128 v5.5a D, Smart Card Services cannot read it. You can find this information on the back of your CAC card itself near the magnetic strip.

This can be solved one of two ways. Either opt for a different enabler or get a new CAC Card.

Yosemite (10.10.x)

Yosemite requires a third-party enabler to be installed in order for your CAC Card to be recognized. There are 5 different verified options for Yosemite users:

Although a verified option, we recommend against using Smart Card Services. The reason for this is that Smart Card Services doesn’t accept all types of CAC Cards–particularly those labeled Oberthur ID One 128 v5.5a D.

Mavericks (10.9.x)

Mavericks is another Mac OS without a built-in Smart Card Reader. This means that you’re going to need to download a CAC Card Enabler. We’ve found five different platforms that work with this OS.

However, we suggest steering clear of Smart Card Services if you’re carrying the Oberthur ID One 128 v5.5a D CAC Card. This enabler does not recognize this particular type of CAC Card.

Mountain Lion (10.8.x)

Since Mountain Lion OS has no built-in Smart Card Reader, you’ll have to avail of a third-party CAC Card Enabler. There are 5 different options to choose from for this platform.

However, if you’re using the CAC Card type, Oberthur ID One 128 v5.5a D, steer clear of Smart Card Services. They don’t recognize this type of card.

Lion (10.7.x)

Lion is one of Mac’s older operating systems. But that doesn’t mean you’re completely out of luck if need to use a CAC card on it. There are 4 different options you have.

It’s worth mentioning that if you are planning on using Smart Cards Services, ensure you don’t have an Oberthur ID One 128 v5.5a D CAC Card. The program doesn’t work with the typing.

Snow Leopard (10.6.x)

The first recommendation I have for Snow Leopard users is to upgrade their system as soon as possible. But if due to constraints you are unable to, there are still a few paths you can take when it comes to ensuring your CAC Card can be read.

Just don’t opt for Smart Card Services if you’re using an Oberthur ID One 128 v5.5a D CAC Card.

Leopard (10.5.x)

If you’re still using Leopard, our first recommendation is to upgrade your OS immediately. However if you’re unable to, there’s still hope for using a CAC Card on your computer.

Your available options for CAC Card Enabler are:

However, TENS will only work if your computer has an Intel processor. It won’t work if you’re using a PPC.

Again, the first recommendation for Leopard is not downloading a new CAC enabler but updating your system.

Our Top CAC Enabler Picks for All Operating Systems

When it comes to which enablers we like best, it boils down to two.

PKard and ActivClient for Mac.

Either one of these is compatible with just about every OS on this list–with the exception of Catalina (Be sure to use their built-in enabler.)

Plus they have vendor support. And that can be quite handy if you’re having issues with your CAC enabler. However, they don’t come free. ActivClient for Mac rings in at around $50 while PKard is available for around $40.


HID ActivID ActivClient 4.0.1.92 CAC and PIV Middleware for Mac This package includes 1 license for 1 user - ActivIdentity Part Number: ACCXXXXLA This package does not include a smart card nor a smart card reader. ActivClient supports standard US government-issued smart cards such as CAC and PIV. ActivClient is the main DoD CAC software. Mac users are helped too. I have devised 5 different methods for you to utilize to install the software. Click the Software & Install Button (second button from the left) in the row of buttons near the top of every page in the site. Once you click the Software & Install Button, follow the buttons from left to right. It has a good review score and the cost is only slightly higher than the V1. This small price increase is worth paying to get a good quality vertical standing CAC reader for Mac desk use. Best CAC Card Readers For Mac – Portable Use. For portable CAC readers with tried and tested Mac compatibility, our top pick is the RT-SCR3 from Rocketek. SIIG’s USB 2.0 Smart Card Reader enables you to add a smart card reader to your USB equipped PC or Mac desktop or notebook computer. This portable smart card reader works with most major smart cards. It is equipped with power and activity LED indicators to monitor your operational status. And it is powered by USB port; no power adapter is needed for great convenience. Catalog download; Driver Downloads; New Arrivals. Rocketek iso7816 EMV smart ic id card reader September 4, 2020 - 10:21 am; Rocketek smart card reader USB smart ATM card reader portable IC card reader August 12, 2020 - 9:36 am; Hot sell chip smart card reader USB SIM card reader CAC card reader wholesale August 12, 2020 - 8:58 am; Contact us.

Steps to Installing Your CAC Reader on Your PC Overview

  1. Ensure your CAC Reader works for PC.
  2. Check to make sure your PC accepts the CAC reader.
  3. Update Your DOD Certificates.
  4. Verify you have the right ActivClient for your branch.

This is the easiest part of the install seeing as almost all CAC readers work for PC. I’ve gone ahead and put together a list of some of the best CAC readers available. Check these out!

[tcb-script src=”https://api.tablelabs.com/t/8iuqt65d.js” defer=””][/tcb-script]

Once you’ve received your CAC reader, the next step is to plug it in and verify your PC recognizes it. If you have selected any of the above readers, you should be good to go. Your computer may actually begin to install the appropriate drivers needed automatically. However if that doesn’t happen, follow these steps to get started:

For Windows 10 Users:

Download Cac Card Reader Software For Mac
  • Right Click the Windows Logo found in the lower left-hand corner of your screen.
  • Click System, then Device Manager
  • Scroll down to where it says Smart Card Readers and click on the little triangle next to it to get started.

For Windows 7/8 Users:

  • Right Click My Computer and select Properties
  • Next select Device Manager and scroll down to Smart Card Readers
  • Select the little triangle next to it in order to get started.

After your drivers have been installed, it’s time to move on to the next step.

To access DOD websites from home, you first need to have DOD permissions certificates on your home computer. These are simple enough to acquire though.

Using InstallRoot will make this issue monumentally easy through their simple to follow wizard. You can download InstallRoot for Windows from the following links:

Once you have downloaded the program, simply run it. It will take you step-by-step on how to update your DOD certificates. After the installation, you can also verify that your DOD certs have been uploaded successfully.

This can be done by heading to your certificate management settings on your default Internet browser and checking to see if the certificates are listed.

After you’ve verified your DOD certificates, you next need to update your ActivClient–more specifically for your appropriate Branch of Service (if applicable).

ActivClient is a program that allows your computer to communicate with the chip on your CAC and relay that information between government websites. Making sure you have this installed is very important.

SO, you need to make sure that your ActivClient is up-to-date. Find your specific branch’s through the links below.

  • Army- In order for these links to work, you’ll need to copy and paste the entire link. Clicking directly on these will transport you to the homepage of AKO instead of to the download link. For Windows 32-Bit, use this link (32-Bit AKO LINK). For Windows 64-Bit, use this link (64-Bit AKO LINK).
  • Navy- Unfortunately, you need to get the client through your command’s IT personnel.
  • Air Force- The Air Force has not made it easy to acquire this software. However it is available for purchase at an ActivClient vendor such as here.
  • Marines- You’ll need to purchase ActivClient from an outside vendor. Check out this one!
  • Coast Guard- Purchase ActivClient from third-party vendor.
  • DOD Civilians- Acquire through vendor.

How To Install Cac Reader On Mac

You Should Now Have CAC Access at Home!

Cac Card Reader Software Download

But if not… There’s usually one particular reason. Your CAC card itself needs updating. Older versions of the card, do not meet the minimum requirements to access. To fix this, just head into your local PSD, and request a new CAC that does have access.

When it comes to installing your new CAC reader onto your home computer, there’s a doubt that installing on Mac is much more complicated. Often, you’ll need to install a CAC Enabler just for your Mac to recognize the hardware. But don’t worry in this handy guide, we’ll walk you through how to install a CAC enabler for Mac and which one to choose.

Here’s the thing…. Mac has many different OS’s which means that there are many different CAC enablers. And some will work for particularly OS’s only.

Cac Reader For Macbook Air

MUST READ IMPORTANT INFO BEFORE YOU BEGIN

Before you get started downloading and installing your CAC Enabler, there is some information that you need to be aware of:

  • Only download and install ONE CAC Enabler. Multiple CAC Enablers can cause your CAC Card reader not to work. If you currently have an incorrect CAC enabler installed, you need to uninstall and remove it before getting the correct one. This includes built-in Smart Card Readers for the newer OS’s.
  • Some of these CAC Enablers will ask for a Keychain Password. You should already have this information. It’s your CAC PIN. But before you enter this information, make sure you’ve already selected your CAC Certificate. And you need to use your full CAC pin. Failure to do so can actually lead to you getting locked out of your CAC Card. If this happens, you’ll have to go to your nearest ID Card Office or PSD to get it unblocked.
  • After successfully installing your CAC Enabler, you need to restart your computer before trying to access any CAC protected site. This ensures that your computer has properly recognized and installed the CAC Enabler.
  • Just because you’ve properly installed and set up your enabler, that doesn’t mean that it will work with all browsers–particularly Firefox. As popular of a browser it is, Firefox is notorious for not allowing CAC-protected sites to be accessed. This is why I recommend using Google Chrome. It has the least obstructions for you when it comes to using your CAC Reader.

What CAC Enabler Do You Need For Your OS?

In order to make sure that you download the right OS, be sure to use our handy Table of Contents to jump to the proper section.

And with that, let’s get your Mac system CAC Card ready!

Best Cac Reader For Mac

Catalina (10.15.x)

If you’ve purchased a Mac with the Catalina OS installed, STOP RIGHT HERE.

Catalina comes pre-equipped with a built-in CAC Enabler. This means you do not need to install a third-party program. If you do, it may interfere with your built-in enabler and cause your CAC to not be recognized. Just be sure that you have the proper DOD certificates installed.

But what if you purchased your Mac and then upgraded to the new system?

Military Cac Reader For Mac

If you haven’t installed any third-party enablers, the built-in function should automatically start working. But if you have previously installed any third-party CAC enablers, you’re going to have to uninstall and completely remove those first.

Mojave (10.14.x)

Similar to the Catalina OS, Mojave also has a built-in Smart Card Reader. This means that a third-party CAC enabler program may not be necessary. So before downloading any other enabler, test out the built-in first–just make sure you have the proper DOD certificates needed.

If your Mojave’s built-in reader is not working, then you can proceed to pick up another CAC enabler. There are 4 verified readers that work for Mojave that we know of.

Each of these should work for any type of CAC Card.

High Sierra (10.13.x)

High Sierra is another Mac OS with a built-in Smart Card reader. However, unlike Mojave or Catalina, you cannot access CAC-protected sites through Safari. They are not supported through Safari in this OS.

You need to use Google Chrome for optimal results. If you are adamantly opposed to using Chrome, I’d recommend to go ahead and update your Mac OS to Mojave or Catalina (if supported). Afterwards, you should find you don’t need a CAC enabler as long as you have the proper certificates.

However, if things aren’t working out the way they should, you do have some options for third party CAC enablers.

These have been verified to work with High Sierra and with every CAC Card type we’ve come across.

Sierra (10.12.x)

Sierra is the last of the Mac OS’s that has a built-in Smart Card Reader. However, you need to be aware that this reader will not function with the Safari browser even with the proper certificates.

Download Cac Card Reader Software For Mac

You’ll need to utilize Google Chrome along with the proper DOD (or other) certificates.

There have been reports of the Sierra built-in CAC reader failing to operate properly. And in that case, you’re going to need to download one of these verified CAC enablers:

These CAC Enablers work with every type of CAC Card.

Dod Cac Reader For Mac

One thing to note is that if you decide to utilize PKard with Sierra, you need to make sure that you’re using PKard version 1.7 or higher.

El Capitan (10.11.x)

Unlike its newer OS counterparts, El Capitan does not come with a built-in smart card reader. You will be required to download and install a third-party program. Thankfully, there are 5 different CAC Enablers you can use.

Cac Card Reader Software Download For Mac

One thing to note is that Smart Card Services will not work with all types of CAC Cards. If your CAC Card is designated as Oberthur ID One 128 v5.5a D, Smart Card Services cannot read it. You can find this information on the back of your CAC card itself near the magnetic strip.

This can be solved one of two ways. Either opt for a different enabler or get a new CAC Card.

Yosemite (10.10.x)

Yosemite requires a third-party enabler to be installed in order for your CAC Card to be recognized. There are 5 different verified options for Yosemite users:

Software

Although a verified option, we recommend against using Smart Card Services. The reason for this is that Smart Card Services doesn’t accept all types of CAC Cards–particularly those labeled Oberthur ID One 128 v5.5a D.

Mavericks (10.9.x)

Mavericks is another Mac OS without a built-in Smart Card Reader. This means that you’re going to need to download a CAC Card Enabler. We’ve found five different platforms that work with this OS.

However, we suggest steering clear of Smart Card Services if you’re carrying the Oberthur ID One 128 v5.5a D CAC Card. This enabler does not recognize this particular type of CAC Card.

Mountain Lion (10.8.x)

Since Mountain Lion OS has no built-in Smart Card Reader, you’ll have to avail of a third-party CAC Card Enabler. There are 5 different options to choose from for this platform.

However, if you’re using the CAC Card type, Oberthur ID One 128 v5.5a D, steer clear of Smart Card Services. They don’t recognize this type of card.

Lion (10.7.x)

Lion is one of Mac’s older operating systems. But that doesn’t mean you’re completely out of luck if need to use a CAC card on it. There are 4 different options you have.

It’s worth mentioning that if you are planning on using Smart Cards Services, ensure you don’t have an Oberthur ID One 128 v5.5a D CAC Card. The program doesn’t work with the typing.

Download Cac Card Reader Software For Mac

Snow Leopard (10.6.x)

The first recommendation I have for Snow Leopard users is to upgrade their system as soon as possible. But if due to constraints you are unable to, there are still a few paths you can take when it comes to ensuring your CAC Card can be read.

Just don’t opt for Smart Card Services if you’re using an Oberthur ID One 128 v5.5a D CAC Card.

Leopard (10.5.x)

If you’re still using Leopard, our first recommendation is to upgrade your OS immediately. However if you’re unable to, there’s still hope for using a CAC Card on your computer.

Your available options for CAC Card Enabler are:

However, TENS will only work if your computer has an Intel processor. It won’t work if you’re using a PPC.

Again, the first recommendation for Leopard is not downloading a new CAC enabler but updating your system.

Reader

Our Top CAC Enabler Picks for All Operating Systems

When it comes to which enablers we like best, it boils down to two.

PKard and ActivClient for Mac.

Either one of these is compatible with just about every OS on this list–with the exception of Catalina (Be sure to use their built-in enabler.)

Plus they have vendor support. And that can be quite handy if you’re having issues with your CAC enabler. However, they don’t come free. ActivClient for Mac rings in at around $50 while PKard is available for around $40.


Comments are closed.